Roof & storm damage

Missing tiles, flashing failures and gutter damage.

Emergency weatherproofing and permanent roof repairs. We handle all roof types including flat membranes and period slate.

Call 07458 148224

Emergency leak patch

When heavy rain penetrates your roof, water can rapidly damage internal ceilings, timber joists, and electrical installations. We respond immediately to halt active water ingress by applying heavy-duty, reinforced waterproof membranes or fast-curing bitumen patches directly over the point of failure. This instant seal protects your property from ongoing weather exposure while internal drying takes place. Once the immediate crisis is contained and weather conditions stabilize, we perform a thorough inspection of the roof structure and present a clear proposal for permanent restoration.

Water ingressTemporary fixWeatherproof

Call about this →

Storm damage repair

Gale-force winds, severe rain, and flying debris can lift, crack, or completely dislodge roof coverings, leaving timber battens exposed. We carefully inspect your entire roof, remove dangerous loose fragments, and replace missing slates or tiles with exact structural matches. Our team inspects surrounding underlay, ridge lines, and hips for hidden stress fractures, ensuring all replacement tiles are securely anchored with heavy-duty fixings to withstand future storm events.

StormTile repairWind damage

Call about this →

Flashing repair

Degraded or displaced lead flashing around chimneys, skylights, dormers, and brick abutments causes persistent internal wall dampness. We carefully reset lifted flashing sections, replace cracked or eroded lead aprons, and seal junctions using specialized high-adhesion roofing sealants. Where mortar joints have deteriorated, we rake out damaged mortar and re-point the brickwork joints to ensure an airtight, watertight seal. We also inspect underlying breathable membranes to prevent hidden rot from forming beneath the leadwork.

FlashingChimneyWatertight

Call about this →

Gutter & downpipe repair

Blocked, overflowing, or sagging gutters allow heavy rainwater to run down exterior walls, leading to penetrating damp, eroded brickwork, and compromised foundations. We clear accumulated debris, leaves, and silt before re-aligning sagging gutter sections to restore correct fall and flow rates. Leaking union joints, split downpipes, and cracked outlet nozzles are repaired or replaced on the spot using weather-resistant PVC or cast-iron fittings. Every system is fully flushed and flow-tested with running water before completion.

GutteringDownpipeDrainage

Call about this →

Flat roof membrane repair

Punctures, torn seams, or blistered sections on flat roof membranes quickly lead to trapped moisture, ceiling water stains, and internal timber rot. We isolate damaged areas, dry out trapped moisture underneath, and apply high-performance reinforced patching compounds or torch-on felt membranes to restore a seamless barrier. Our technicians address ponding water issues by unblocking roof outlets, inspecting internal drainage channels, and reinforcing surrounding perimeter trims to extend the lifespan of your flat roof.

Flat roofMembranePonding

Call about this →

Fallen tree/debris removal

Fallen tree branches and windblown debris landing on a roof can puncture tiles, smash timber rafters, and compromise structural stability. We safely lower and clear heavy debris from the roof surface without causing further damage. Once the area is cleared, we perform an immediate safety and structural assessment, install emergency protective coverings over exposed areas, and provide a clear repair roadmap to restore your roofline.

Tree damageImpactStructural check

Call about this →

Chimney stack repair

Weathered chimney stacks with crumbling mortar joints or loose brickwork pose a serious falling hazard and allow water to seep into interior fireplaces. We rake out degraded mortar, clean the joints, and repoint the stack with high-durability, frost-resistant mortar mixes. Our team inspects chimney pots, replaces broken terminal caps, and checks lead step flashing around the base to ensure the chimney structure remains solid, stable, and weather-sealed.

ChimneyRepointingStack

Call about this →

Full roof replacement

When a roof suffers catastrophic storm damage or reaches the end of its useful lifespan, localized repairs are no longer cost-effective. We conduct comprehensive structural surveys, measuring tile areas, rafter integrity, and insulation needs to prepare an accurate full-replacement estimate. While scaffolding and material deliveries are scheduled, we secure the building under durable temporary weather covers. We manage every stage of the replacement—from stripping old coverings and fitting breathable underlay to installing new battens, slates, and tile systems.

Full replacementSurveyScaffolding

Call about this →

Ridge tile re-bedding

Loose or missing ridge tiles leave the top apex of your roof vulnerable to driven rain and high winds. We remove failed, crumbling mortar, clean the underside of existing ridge tiles, and re-bed them using high-strength polymer-modified mortar mixes. Alternatively, we convert aging roofs to modern dry-ridge systems, mechanically fixing every tile into place to guarantee maximum resistance against storm-force uplift without relying on perishable mortar joints.

Ridge tileRe-beddingMortar

Call about this →

Slate & tile replacement

Slipped, cracked, or missing slates and tiles ruin the appearance of your home and leave internal felt underlay exposed. We carefully extract damaged units without disturbing adjacent roofing materials and install exact color- and profile-matched replacement slates or clay/concrete tiles. Using heavy-duty copper rivets, stainless steel slate hooks, or corrosion-resistant nails, we lock each replacement securely into position and inspect the immediate surrounding area for hidden sub-layer wear.

SlateTileMatching

Call about this →

Roof valley repair

Roof valleys collect massive volumes of runoff water from intersecting roof pitches, making them vulnerable to leaf blockages, membrane splits, and lead fatigue. We clear accumulated moss and silt, repair minor membrane tears, or replace worn lead lining with heavy-duty code lead or continuous fiberglass valley troughs. By restoring smooth, unobstructed drainage pathways, we ensure heavy rainfall is safely directed into your guttering without backing up beneath adjacent roof tiles.

ValleyRe-sealLead work

Call about this →

Emergency tarping

When severe storm damage exposes large sections of your roof, instant protection is essential to prevent catastrophic water damage. We deploy heavy-duty, UV-resistant, reinforced tarpaulins anchored securely with timber battening to resist strong wind gusts. Where internal water accumulation has already occurred, we establish controlled drainage diversions to protect your living spaces while permanent repair plans, scaffolding setups, and insurance assessments are arranged.

TarpEmergencyTemporary cover

Call about this →

Warning Signs

Signs you need an emergency roof repair

A damp patch spreading across a ceiling, daylight visible through the roof structure, tiles or slates found in the garden after high winds, or a section of flashing that's visibly lifted away from a chimney or wall are all signs your roof has an active breach. Left unaddressed — even for a few days — a small gap can let in enough water to damage insulation, timber and ceilings below. We prioritise active leaks and storm-damage callouts, especially ahead of forecast rain.

Pricing

What affects the cost of roof repairs

Cost depends on the roof type (flat membrane, pitched tile, or period slate all require different materials and techniques), how accessible the damaged area is (scaffolding or a tower may be needed for steep or high sections), and whether the damage is localised or has affected a wider area of the roof structure. A single missing tile or a small flashing repair is usually quick and affordable; storm damage across multiple sections, or a full membrane replacement, takes longer to price accurately, which is why we always inspect before quoting a fixed price.

FAQ

Frequently Asked Questions

Can you carry out a temporary weatherproof patch immediately?

Yes — where a full repair isn't possible on the first visit (for example, waiting on matching period slate), we make the roof watertight with an emergency patch, then schedule the permanent repair.

Do you work on flat roofs as well as pitched/tiled roofs?

Yes, we handle flat membrane roofs, pitched tile roofs, and period slate, including chimney flashing and gutter repairs.

What should I do if a tree or debris has fallen on my roof?

Don't attempt to remove it yourself — call us. We assess structural safety before any removal work begins, particularly if the debris is resting on damaged timber.

Will you deal with my insurer directly?

We can provide photographic evidence, a written damage report, and liaise with your insurer as part of a storm-damage claim.

Our Approach

Why choose us for roof emergencies

Storm and weather damage doesn't wait for a convenient appointment slot, and neither do we — roof breaches are treated as a priority because every hour of exposure increases the risk of damage spreading to the ceiling, insulation and structure below. Our team handles the full range of southeast London roof types, from Victorian slate to modern flat membranes, so period-property repairs are matched to the existing materials rather than a generic fix.

Not sure which roof service you need?

Describe the problem and we'll dispatch the right roofer.

Call 07458 148224