Electrical make-safe

Power loss, faulty wiring and water-affected electrics.

Emergency electrical isolation and repairs. We make circuits safe first, then diagnose and restore where possible.

Power outage diagnosis

A sudden power loss can disrupt your entire household or business. We inspect your main consumer unit and residual current devices (RCDs) to determine whether the issue is isolated to a single breaker, a tripped main switch, or a wider grid supply problem. Using calibrated digital meters, we test voltage levels across individual circuits to pinpoint overloads or neutral faults. Once the source is identified, we restore power to unaffected areas and isolate compromised circuits so essential appliances remain operational while repairs take place.

EmergencyPower lossSafety first

Call about this →

Consumer unit faults

Fuse boards that refuse to reset, buzz loudly, or trip repeatedly indicate active earth faults, loose busbar connections, or failing RCD components. We carry out insulation resistance and loop impedance testing across each outgoing circuit to distinguish between a faulty appliance and internal consumer unit degradation. If components are scorched or obsolete, we safely replace failed breakers, tighten internal connections, and provide recommendations for full consumer unit upgrades that meet current electrical safety standards.

Fuse boardCircuit testingConsumer unit

Call about this →

Damaged wiring repair

Exposed conductors, cracked socket faceplates, or scorched light fittings pose immediate shock and fire hazards. We respond promptly to isolate the live power source and perform an immediate visual and electrical safety assessment. Depending on the extent of damage, we either execute a swift, safe temporary bypass or splice in new flame-retardant cable with certified junction boxes and fresh accessories. Every repaired connection is tested for earth continuity and insulation integrity before power is safely restored.

Exposed wiringFire riskMake safe

Call about this →

Water-affected electrics

Water ingress from burst pipes, roof leaks, or flooding near sockets, light switches, or distribution boards creates a high risk of electrical fires and severe shocks. We immediately isolate all moisture-impacted circuits at the main panel to prevent arching and short circuits before any drying or trade work begins. Our team performs thermal assessments and high-voltage insulation tests to track water migration within conduit and backboxes. Once the structure is dry, we replace water-damaged fittings, re-test every line, and safely re-energize the system step by step.

Water damageShock riskIsolation

Call about this →

Burning smell investigation

The scent of burning plastic, discoloured wall switches, or hot-to-the-touch outlet plates indicates active electrical arcing, overloaded wiring, or loose terminal screws. This is an immediate fire hazard. We arrive with thermal imaging equipment to pinpoint hidden hotspots inside walls and behind consumer units. We isolate the damaged circuit, trace the overheated cable, cut out charred sections, and replace degraded sockets, switches, or terminals with high-grade, heat-resistant components.

Fire hazardUrgentCircuit isolation

Call about this →

Emergency lighting faults

Failing escape route lighting, dead backup batteries, or faulty control panels leave commercial properties vulnerable and out of compliance. We run diagnostic checks on emergency luminaires, testing battery backup duration, key switch operation, and control module functionality under simulated power cuts. Faulty emergency ballasts, dead LED driver units, or depleted batteries are replaced on the spot. Upon completion, we update your fire safety logbook, verify system compliance, and ensure your building meets current emergency lighting standards.

Safety lightingCommercialCompliance

Call about this →

Heater electrical faults

Storage heaters or immersion water heaters that repeatedly trip circuit breakers, produce unusual humming noises, or fail to produce heat require structured electrical diagnosis. We inspect heating elements, dual-pole switches, thermostats, and internal wiring harnesses to isolate short circuits or calcified element breaches. Using multi-meters, we measure resistance levels to identify failed components. We replace burnt connections, install fresh thermostats or elements, and verify the heater draws correct amperage without overloading your home electrical distribution system.

ImmersionStorage heaterThermostat

Call about this →

Appliance electrical isolation

When a heavy-duty household appliance—such as a washing machine, tumble dryer, or electric cooker—repeatedly trips your RCD, it often indicates an internal earth fault or short circuit. We run diagnostic isolation tests at the appliance outlet, wall switch, and consumer unit to confirm whether the fault lies within the fixed wiring or the appliance. Once confirmed, we safely disconnect the faulty unit from the electrical supply, make the wall outlet safe, and provide a safety report so you know whether an appliance repair technician or a full unit replacement is required.

ApplianceFire riskIsolation

Call about this →

Socket & switch replacement

Faulty, cracked, or flickering wall switches and sockets can turn into serious electrical hazards. We replace worn, damaged, or outdated accessories on the same day, upgrading them to modern, BS-compliant heavy-duty fittings or USB-integrated faceplates. Before installing new hardware, we check the condition of the underlying backboxes and conductor insulation. After fitting, we execute live polarity, earth loop impedance, and RCD trip testing to ensure compliance and issue safety certification before leaving.

Quick fixSame-dayTesting

Call about this →

External lighting faults

Outdoor security lights, garden power points, and driveway bollards are exposed to moisture, insect infestation, and weather extremes that cause hidden short circuits and tripped switches. We safely isolate the exterior circuit at the main board, trace underground armor cables (SWA), and check all junction boxes for water ingress or seal failures. We replace damaged weatherproof fittings with IP65-rated or higher enclosures, seal entry points with commercial silicone, and upgrade worn sensor controls or LED drivers so your outdoor security and landscape lighting remain reliable.

OutdoorSecurityWeatherproof

Call about this →

Warning Signs

Signs you need an emergency electrician now

Some electrical faults are inconvenient; others are dangerous. Call immediately if you smell burning or see scorch marks near sockets, switches or the fuse board, if you've lost power to part or all of the property, if water has come into contact with wiring or a consumer unit, or if you're getting shocks from an appliance or switch. Any of these can indicate a fire risk or live-fault condition, and our engineers isolate the affected circuit first to make the property safe before diagnosing the underlying cause.

Pricing

What affects the cost of an electrical make-safe

Pricing depends mainly on how the fault presents: isolating a single faulty circuit or appliance is a quick, low-cost job, while diagnosing an intermittent fault across a fuse board, or making safe electrics that have been in contact with water, takes longer and may involve testing multiple circuits. Older properties with outdated wiring or non-standard fuse boards can also add time. We always make the property electrically safe first — that part is never delayed by cost discussions — then give you a clear price for the permanent repair.

FAQ

Frequently Asked Questions

Is it safe to stay in the property during a power outage?

In most cases yes, but if you can smell burning, see sparking, or have water near the fuse board, switch off at the mains if it's safe to reach and call us immediately.

Are your electricians qualified to sign off work?

Yes, our engineers carry out make-safe work to current wiring regulations and can issue the relevant certification once permanent repairs are complete.

What if my whole property has lost power?

This is usually a fuse board or supply-side fault. We prioritise total power-loss callouts and aim to restore safe power the same day wherever possible.

Can you fix water-damaged electrics?

We isolate and make safe first, then coordinate with our Drying & Reinstatement team if the water source is part of a wider leak or flood.

Our Approach

Why choose us for electrical emergencies

Electrical faults get worse, not better, if they're left — a flickering circuit today can be a fire risk tomorrow. Our approach is always isolate-first: we cut the danger before we investigate the cause, so you're not left waiting for a diagnosis while a live risk remains in the property. And because we're multi-trade, if the fault was caused by a leak or storm damage, we can bring in plumbing or roofing repairs under the same job rather than passing you to another contractor.

Not sure which electrical service you need?

Describe the problem and we'll dispatch the right electrician.

Call 07458 148224